It is good practice to use -18 dBFS on the output meter as an approximation of 0 VU on an analog meter.Īll connected receive channels are OK (receiving digital audio as expected). Use the up/down buttons to attenuate the channel output from 0 dB (no attenuation) to -24 dB in 1 dB increments, and from -24 to -78 in 3 dB increments.ĭisplays a selected channel's audio level in dBFS. Set the selected channel to an output level that matches the connecting device: Set the selected channel to line- or aux-level to match the input signal. A muted channel is still routed to the HEADPHONE jack for monitoring or troubleshooting. Illuminates red when the channel output is muted (hold its channel select button for 3 seconds).
When associated to an MXW group, access point channels are automatically routed to the outputs of the ANI. When the device is associated to an MXW Group, inputs are automatically routed to Linked microphone channels (Input A to channels 1-4 Input B to 5-8).Ĭonverts digital network audio to an analog output for each channel. The data provides an accurate estimate for the number of MXW channels that can be safely operated in the scanned area.Īdds analog line- or aux-level signals to the digital network. The MXW access point features an RF scanner to document the average and peak RF interference. The MXW Wireless components transmit in unlicensed spectrum that may be used by other wireless devices (in particular wireless phones and headsets) operating in the same area. Components interconnect with teleconferencing equipment and digital signal processors. Microflex Wireless components and software are compatible with Crestron, AMX, and other programmable controllers.
Upon detecting interference, microphones automatically switch to the best alternate RF channel determined during continuous background scanning. Once Linked, the system automatically scans the available RF spectrum and selects the best quality RF channels on which to operate. Multiple access point transceivers can work together to support large installations or scalable rooms.
Microphones are assigned to channels on an access point transceiver simply by arranging them in an associated charging station and pressing the Link button. The MXW Series uses automatic frequency coordination to quickly set up all of the microphones and achieve reliable, uninterrupted wireless communication. Digital audio can coexist safely on the same network as IT and control data, or can be configured to use a dedicated network.
Developed with Dante tm technology by Audinate ®, MXW provides low latency, clock synchronization, and high Quality-of-Service (QoS) to provide reliable audio transport. The MXW wireless link is encrypted using the Advanced Encryption Standard (AES-256), as specified by the US Government National Institute of Standards and Technology (NIST) publication FIPS-197.Īdvanced Networking and Control Digital Audio Networkingĭigital audio is carried over standard Ethernet using shielded Cat5e (or higher) cables. By eliminating wires, MXW noticeably reduces clutter and provides professional elegance. Modern, low-profile wireless microphone designs elegantly integrate into diverse AV environments. Battery statistics are viewable from the control software (battery runtime, time to full charge, charge cycle count and battery capacity). All Microflex microphones are engineered to clearly capture the natural characteristics of voice communications, and include CommShield ® Technology which guards against unwanted radio interference from consumer wireless devices such as cell phones and tablets.Įach MXW microphone is powered from a rechargeable Lithium-ion battery, which can be charged at any time without removal from the microphone.
0 kommentar(er)
